Part Labels (Optional)

Print labels according to your input or cut list. 

Further in Parts labels, you can print the label one for each part or one per N units of parts by selecting one of the option shown below

Bar Code Labeling - Add on Module - Nesting software

Consider the following example: Suppose there are 4 parts of different sizes and qty required to be cut.

Part 1 - qty required 65

Part 2 - qty required 50

Part 3 - qty required 75

Part 4 - qty required 90

 

If you have chosen One per Part then only four labels will be printed, i.e., one label for each part. 

 

1 label for part 1

1 label for part 2

1 label for part 3 and 

1 label for part 4 will be made.

Now, If One per N parts is selected then labels will be printed depending on the value of N given.

Say N = 1,  then

65 labels for part 1

50 labels for part 2

75 labels for part 3 and 

90 labels for part 4 will be printed.

Hence, 1 label for every unit of each part will be made.

 

Say N = 10, then

 

7 labels for part 1

5 labels for part 2

8 labels for part 3 and 

9 labels for part 4 will be printed. 

Hence, 1 label for every 10 units of a part will be printed.

 

Say N = 15, then

 

5 labels for part 1

4 labels for part 2

5 labels for part 3 and 

6 labels for part 4 will be printed.

See Also