Settings in PLUS RepliCAM

Settings

It contain the tools necessary for Plus-RepliCAM. It contain following various settings as:

Unit settings : This settings is provided for the user's convenient. To set the units in which you are working go to ' Settings > Units Settings '. For more detail see the link.
References : This is very mandatory setting in PLUS RepliCAM. References contain four reference points, which you have to fix on picture's reference points sequentially and precisely i.e., marking on picture cause this RP plays mandatory roll in drawing. Reference Points as follows.
Set Reference Rectangle sizeReferences mark on picture create a Rectangle to set its size we use this setting. See details
Grid :You can display a reference grid consisting of a regular pattern of dots by selecting option. This having specific distance along X-axis and Y-axis. The reference grid extends only to the limits of the drawing, helping you to visualize the boundary of your drawing and to align entities and visualize distances between entities.

Grid On/Off :You can make Grid 'On ' or 'Off' by selecting this. To make this On Select ' Setting > Grid > Grid On/Off ' or select option on Snap tool bar.

Grid Settings : You can specify spacing for X and Y-axis. To set the spacing go 'Setting>Grid>Grid Size' or select option from 'Snap' tool bar. This will give you a message box as follows.

Snaps :Snaps Enables points to be precisely located on reference points of existing entities. There different types of snaps available like Snap Grid, Point Snap, Mid Point Snap, Centre Snap, Perpendicular Snap, Angular Snap, Insertion Snap. For detail see the link.
Ortho On/Off : To restrict line drawing only in horizontal or vertical this option is used. To make this enable select 'Setting>Ortho>Ortho On/Off' or select option from tool bar.
Edit Layer : This is setting which are applying for various Layer while drawing. There are certain properties specified in this settings for each layer which we can change. To select this choose 'Settings Menu > Edit Layers' or select icon from View toolbar. Some properties like color ,Line width, Style, Transparency, Visible, Pick able and etc. For detail see the Link Page.

Settings

See Also