Editing toolbar.You can connect two entities with an
arc of a specified radius to create a rounded edge. You can fillet pairs of line
segments, straight polyline segments and arcs. To use this select 'Fillet' from
Modify menu bar or select icon from
Editing toolbar.
Steps to Fillet the two Entities
Select the Fillet tool.
Specify the 'Fillet Radius' in Input toolbar.
Select the first entity (L).
Select the second entity (M).
|
|
|
|
1. Entity 'L' And 'M' to be fillet |
2. Fillet between Entities. |
In above fig.1 'L' and 'M' are two entities which to be fillet. To do fillet do all steps as described above and you will get fillet between these two lines as shown in fig. 2.
You can fillet entity pair as Line-Line, Line-Arc, Arc-Arc.
