Output Page

Output page show the summary of optimization. It contains following details

PLUS Reels : Output Page

Stock Stock Name give the name of stocking used for for that layout.
Qty It show the no of times the layout to be cut.
Uti. % Percentage utilization for each layout.
Thk Thickness of the stock used for layout.
Length Length of the stock.
Rest Remaining Length of stock used for layout.
Pieces x Qty Details Gives the information about strips and there qty to be cut in layout.
Confirm You can reject some layouts by un-checking this box. In such a case, some strips will not get made. You can re-optimize (renest) the remaining strips  by clicking on the "Renest Remaining" button. This will not change the accepted layouts, but optimize the remaining strips , and add layouts to the result.

Layout Picture : When you select row in layout detail table, Its drawing will appear as above. This layout drawing shows you strips  nests in it, its name, size and cut position. Also  you can customize the layout drawing(Click Here). Whatever you do changes in layout drawing it same will appear in the RTF output.

Layout Details: 

Layout The details of the layout that is currently selected in the Layout Summary table is displayed here. In the above case the last layout (number 15) is highlighted.
Stock Used The stock name and the stock size is displayed.
Name Name of the strip to be cut.
Cut Position The position of the knife/saw considering the cut width.
Angle It shows the cutting angle at strip edge.
Flipped Its shows whether strips is flipped while nesting.
Rotated(180) Its shows whether strip is rotated at an angle of 180.

The overall result summary

Utilization The overall utilization percentage.
Total No. Of Layout The no of layouts made after optimization.
No Of. Stock Used The total number of stocks that were used in the optimization.
No Of Disc Made The total number of disc made in all the layouts.
No Of Offcut made Numbers of rests, that are greater than the minimum offcut size
Stock Vol. Used Gives total volume of the stock used in optimization
Disc Vol Made. Gives total volume of the disc made.

Update Inventory :Updates the inventory. If stock from the inventory have been consumed, it reduces their quantity in the inventory. It also updates offcuts into the inventory, so that they are available for the next job.

RTF Output :Export a detailed output listing as an RTF file, and display it.

Print Labels :Print the labels for strips, disc and offcut using barcodes. (Optional Add - On feature: Click for details)

See Also