PLUS Bend supports both metric as well as English units. You can change the units at any time. Go to Tools->Unit settings.
|
Length |
Select the units to specify lengths. |
|
Area |
Select the units to specify areas |
|
Decimal Precision |
Precision for units displayed in as decimal. |
|
Display Precision |
Precision for fractional units. This combo box is only enabled if you have selected fractional inch units. |
For Units in fractional Inches the units can be input in following ways (say 1/32 is the display precision).
Consider you have to input 6.25 inches. It can be input in one of the following ways
6.25 or 6.25” or 6 1/4 or 6 1/4" or 6 8/32 or 6 8